You may be interested in…
-
DIY Products, Switches & Relays
Fibaro Double Switch 2 FGS-223
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
SKU: F2R068 -
DIY Products, Motion Sensors, Safety & Security
Fibaro Smoke Sensor FGSD-002
- The Fibaro Smoke Sensor Is A Universal, Optical Z-Wave Smoke Detector.
- Fire Alarm Is Signaled By Sound, Visual Indicator Blinking And By Sending Z-Wave Alarm And Control Commands.
- The Optical Sensor Detects Smoke At An Early Stage Of Fire, Often Before Flames
- Appear And Temperature Starts To Rise Significantly.
- Moreover The Device Has A Built-In Temperature Sensor, Which Is Programmable Indicator Of Exceeding Set
- Temperature Level.
- The Fibaro Smoke Sensor Is Designed To Be Placed On A Wall Or Ceiling.
- Visual Indicator Signals Fire, Operating Mode And Is Used To See If Device Is Within The Z-Wave Network.
- The Smoke Sensor Is Designed To Operate In Confined Spaces,
- Under Normal Conditions (Lacking Smoke, Dust, Condensed Water Vapor).
SKU: FS055 -
DIY Products, RGB Mixers
Fibaro RGBW Controller FGRGBWM-441
FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.
It can also measure active power and energy consumed by the load.
Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
SKU: FRG064 -
Curtain Motor Controllers, Curtains-Blinds, DIY Products
Fibaro Roller Shutter 2 FGR-222
- FIBARO Roller Shutter is a smart wall switch designed to control motors of roller blinds,
- awnings, venetian blinds and other single phase,
- AC powered devices via Z-Wave network.
- It measures active power and energy consumed by the controlled load. You can install it with provided cover plate and switch button or other compatible.
SKU: FRO065
Cart totals
Subtotal | ₹243,006.15 |
---|---|
Shipping | |
Total | ₹243,006.15 (includes ₹4,809.66 VAT) |