Activities

Compatible with any Z-Wave or Z-Wave+ Controller,

• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,

• Advanced microprocessor control,

• Active power and energy metering functionality,

• Works with various types of switches – momentary, toggle, three-way, etc,

• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,

• FIBARO Switch 2 is an extension unit.

 

Compatible with any Z-Wave or Z-Wave Plus Controller,

• Controlled by FIBARO Home Center or any other Z-Wave controller,

• Advanced microprocessor control,

• Implemented algorithm of smart light source detection,

• Auto-adjustment of the appropriate control mode to connected load,

• Active power and energy metering functionality, • Soft start function,

• Memory of the last lighting level settings,

• Works with various types of switches – momentary, toggle, three-way, etc.

• Active element: semiconductor electronic switch,

• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,

• FGD-212 is an extension unit.

Compatible with any Z-Wave or Z-Wave+ Controller,

• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,

• Advanced microprocessor control,

• Active power and energy metering functionality,

• Works with various types of switches – momentary, toggle, three-way, etc,

• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,

• FIBARO Switch 2 is an extension unit.

• FIBARO Roller Shutter is a smart wall switch designed to control motors of roller blinds,
• awnings, venetian blinds and other single phase,
• AC powered devices via Z-Wave network.
• It measures active power and energy consumed by the controlled load. You can install it with provided cover plate and switch button or other compatible.

FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.

It can also measure active power and energy consumed by the load.

Controlled devices may be powered by 12 or 24V DC.

Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.