-
×
Fibaro Single Switch 2 FGS-213Product Class: Normal, Pay Now: 7299Product Code: SHM5451- Warranty:
12 Months
- Vendor:
Delhi Home Automation
Subtotal: ₹14,598.00
Cart
You may be interested in…
-
DIY Products, RGB Mixers
Fibaro RGBW Controller FGRGBWM-441
FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.
It can also measure active power and energy consumed by the load.
Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
SKU: FRG064 -
DIY Products, Switches & Relays
Fibaro Double Switch 2 FGS-223
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
SKU: F2R068 -
DIY Products, Door Window Sensors, Safety & Security
Fibaro Door Sensor 2 FGDW-002
FIBARO Door/Window Sensor 2 is a wireless,
battery powered Hall effect contact sensor,
compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc.
Opening is detected by separating the sensor’s body and the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.
SKU: FD063 -
Dimmers, DIY Products
Fibaro Dimmer 2 FGD-212
Compatible with any Z-Wave or Z-Wave Plus Controller,
• Controlled by FIBARO Home Center or any other Z-Wave controller,
• Advanced microprocessor control,
• Implemented algorithm of smart light source detection,
• Auto-adjustment of the appropriate control mode to connected load,
• Active power and energy metering functionality, • Soft start function,
• Memory of the last lighting level settings,
• Works with various types of switches – momentary, toggle, three-way, etc.
• Active element: semiconductor electronic switch,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FGD-212 is an extension unit.
SKU: FD067
