You may be interested in…
-
DIY Products, RGB Mixers
Fibaro RGBW Controller FGRGBWM-441
FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.
It can also measure active power and energy consumed by the load.
Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
SKU: FRG064 -
Accessories, DIY Products
Fibaro Keyfob FGKF-601
FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.
Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.
Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.
Built-in locking system will ensure that unauthorized person will not take control of your home
SKU: FK061 -
Curtain Motor Controllers, Curtains-Blinds, DIY Products
Fibaro Roller Shutter 2 FGR-222
- FIBARO Roller Shutter is a smart wall switch designed to control motors of roller blinds,
- awnings, venetian blinds and other single phase,
- AC powered devices via Z-Wave network.
- It measures active power and energy consumed by the controlled load. You can install it with provided cover plate and switch button or other compatible.
SKU: FRO065 -
DIY Products, Switches & Relays
Fibaro Double Switch 2 FGS-223
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
SKU: F2R068 -
Dimmers, DIY Products
Fibaro Dimmer 2 FGD-212
Compatible with any Z-Wave or Z-Wave Plus Controller,
• Controlled by FIBARO Home Center or any other Z-Wave controller,
• Advanced microprocessor control,
• Implemented algorithm of smart light source detection,
• Auto-adjustment of the appropriate control mode to connected load,
• Active power and energy metering functionality, • Soft start function,
• Memory of the last lighting level settings,
• Works with various types of switches – momentary, toggle, three-way, etc.
• Active element: semiconductor electronic switch,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FGD-212 is an extension unit.
SKU: FD067 -
Accessories, DIY Products, Switches & Relays
Fibaro The Button FGPB-101
FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device.
It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System.
Different actions may be triggered with one to five clicks or by holding the button down.
In panic mode, each press of the button results in triggering the FIBARO Alarm.
With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
SKU: FB060