Compatible with any Z-Wave or Z-Wave Plus Controller,
• Controlled by FIBARO Home Center or any other Z-Wave controller,
• Advanced microprocessor control,
• Implemented algorithm of smart light source detection,
• Auto-adjustment of the appropriate control mode to connected load,
• Active power and energy metering functionality, • Soft start function,
• Memory of the last lighting level settings,
• Works with various types of switches – momentary, toggle, three-way, etc.
• Active element: semiconductor electronic switch,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FGD-212 is an extension unit.
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.
Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.
Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.
Built-in locking system will ensure that unauthorized person will not take control of your home
FIBARO Door/Window Sensor 2 is a wireless,
battery powered Hall effect contact sensor,
compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc.
Opening is detected by separating the sensor’s body and the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.
FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device.
It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System.
Different actions may be triggered with one to five clicks or by holding the button down.
In panic mode, each press of the button results in triggering the FIBARO Alarm.
With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
We help you in searching the right product for you.
Start A Conversation
Click here to chat with me!
Search marketplace now
Latest Products
Latest Posts
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
Compatible with any Z-Wave or Z-Wave Plus Controller,
• Controlled by FIBARO Home Center or any other Z-Wave controller,
• Advanced microprocessor control,
• Implemented algorithm of smart light source detection,
• Auto-adjustment of the appropriate control mode to connected load,
• Active power and energy metering functionality, • Soft start function,
• Memory of the last lighting level settings,
• Works with various types of switches – momentary, toggle, three-way, etc.
• Active element: semiconductor electronic switch,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FGD-212 is an extension unit.
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.
It can also measure active power and energy consumed by the load.
Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
Fibaro Smoke Sensor FGSD-002
Fibaro Swipe FGGC-001
Lumi Wi-Fi 12 Touch Glass Series-White
