You may be interested in…
-
DIY Products, Switches & Relays
Fibaro Single Switch 2 FGS-213
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
SKU: F1R066 -
DIY Products, Motion Sensors, Safety & Security
Fibaro Smoke Sensor FGSD-002
- The Fibaro Smoke Sensor Is A Universal, Optical Z-Wave Smoke Detector.
- Fire Alarm Is Signaled By Sound, Visual Indicator Blinking And By Sending Z-Wave Alarm And Control Commands.
- The Optical Sensor Detects Smoke At An Early Stage Of Fire, Often Before Flames
- Appear And Temperature Starts To Rise Significantly.
- Moreover The Device Has A Built-In Temperature Sensor, Which Is Programmable Indicator Of Exceeding Set
- Temperature Level.
- The Fibaro Smoke Sensor Is Designed To Be Placed On A Wall Or Ceiling.
- Visual Indicator Signals Fire, Operating Mode And Is Used To See If Device Is Within The Z-Wave Network.
- The Smoke Sensor Is Designed To Operate In Confined Spaces,
- Under Normal Conditions (Lacking Smoke, Dust, Condensed Water Vapor).
SKU: FS055 -
Accessories, DIY Products
Fibaro Keyfob FGKF-601
FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.
Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.
Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.
Built-in locking system will ensure that unauthorized person will not take control of your home
SKU: FK061 -
Dimmers, DIY Products
Fibaro Dimmer 2 FGD-212
Compatible with any Z-Wave or Z-Wave Plus Controller,
• Controlled by FIBARO Home Center or any other Z-Wave controller,
• Advanced microprocessor control,
• Implemented algorithm of smart light source detection,
• Auto-adjustment of the appropriate control mode to connected load,
• Active power and energy metering functionality, • Soft start function,
• Memory of the last lighting level settings,
• Works with various types of switches – momentary, toggle, three-way, etc.
• Active element: semiconductor electronic switch,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FGD-212 is an extension unit.
SKU: FD067 -
Curtain Motor Controllers, Curtains-Blinds, DIY Products
Fibaro Roller Shutter 2 FGR-222
- FIBARO Roller Shutter is a smart wall switch designed to control motors of roller blinds,
- awnings, venetian blinds and other single phase,
- AC powered devices via Z-Wave network.
- It measures active power and energy consumed by the controlled load. You can install it with provided cover plate and switch button or other compatible.
SKU: FRO065 -
DIY Products, Door Window Sensors, Safety & Security
Fibaro Door Sensor 2 FGDW-002
FIBARO Door/Window Sensor 2 is a wireless,
battery powered Hall effect contact sensor,
compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc.
Opening is detected by separating the sensor’s body and the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.
SKU: FD063 -
Apple Home Kit, DIY Products, Motion Sensors, Optional Service (OSP), Safety & Security
Fibaro Apple Kit Motion Sensor (FGBHMS-001)
Apple Home Kit, DIY Products, Motion Sensors, Optional Service (OSP), Safety & SecurityFibaro Apple Kit Motion Sensor (FGBHMS-001)
FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy wireless technology.
Along with detecting motion, the accessory measures temperature and light intensity.
Built-in accelerometer detects tampering with the accessory.
Every time the movement is detected, Motion Sensor will glow in different colour depending on the temperature.Controlling this HomeKit-enabled accessory requires an iPhone, iPad, or iPod touch with iOS 9.3 or later.
Controlling this HomeKit-enabled accessory away from home requires a third-generation Apple TV with Apple TV software 7.2.1 or later or a fourth generation Apple TV with tvOS 9.2 or later and an iPhone, iPad, or iPod touch with iOS 9.3 or later.SKU: FAM006 -
DIY Products
DomoGenie Wi-Fi 2 Channel Relay
It’s a small 2 channel switch module which is installed into the switch box to make the traditional switch become smart, and can be controlled by mobile phone. Make your home Appliances ( Light, Fan & Socket) control individual appliances with up to 6 amp ratings use smart life app to turn them ON/OFF from anywhere from the world. Use voice assistance like Amazon Alexa & Google Assistant to operate appliances with Voice. Fits in any switchboard, install it in just 10 min. Control From anywhere, We Can Control switch From anywhere using smart app. automatic Switch Schedule On App. Lets Application Operate automatically at Present TIME, Save Power with Auto turn Off timer, Create Auto Turn Off Timer to Switch OFF application when no Use, Voice Control the Application with your voice using Digital Assistant.
SKU: DG2R029 -
DIY Products, Motion Sensors, Safety & Security
Fibaro Motion Sensor FGMS-001
FIBARO Motion Sensor is a universal Z-Wave multi-sensor.
Along with detecting motion the device measures the temperature and light intensity.
The sensor has a built-in accelerometer to detect any tampering of the device.
FIBARO Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface.
The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network.
The motion sensor can be used for lighting scenes and presence monitoring systems
SKU: FM062
Cart totals
Subtotal | ₹140,793.15 |
---|---|
Shipping | |
Total | ₹140,793.15 (includes ₹1,982.75 VAT) |