- Power supply: 100-240V~ 50/60Hz
- Power consumption: < 1.3W
- Operational temperature: 0-35°C
- For installation in boxes: ≥ 50mm
- Operational current: up to 1mW
- Device temperature protection: 0.25-1.1A 105°C
- Active element: Device control: semiconductor electronic switch ε remotely
- Radio protocol: Radio waves directly
- Radio signal power: External switch Z-Wave (500 series chip) up to 1mW 865 MHz IN;
- Radio frequency: Range up to 50 m outdoors up to 40 m indoors (depending on building materials) RoHS 2011/65/EU RED 2014/53/EU
- Comply with In directives: RoHS 2011/65/EU RED 2014/53/EU
- Dimensions (L x W x H): 42.5 x 38.25 x 20.3 mm
Fibaro Dimmer 2 FGD-212
Product Code: SHM7686Product Class: DYP
Sold By: Arihant Automation
- Compatible with any Z-Wave or Z-Wave Plus Controller,
- Controlled by FIBARO Home Center or any other Z-Wave controller,
- Advanced microprocessor control,
- Implemented algorithm of smart light source detection,
- Auto-adjustment of the appropriate control mode to connected load,
- Active power and energy metering functionality, • Soft start function,
- Memory of the last lighting level settings,
- Works with various types of switches – momentary, toggle, three-way, etc.
- Active element: semiconductor electronic switch,
- To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
- FGD-212 is an extension unit.
₹6,699.00
Report AbuseOther Sellers
Weight | 0.250 kg |
---|---|
Dimensions | 10 × 10 × 3 cm |
Human Interface | |
Installation | |
Connectivity | |
Color | |
Brand | |
Connects To | |
Country of Origin |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
-
Accessories, DIY Products
Fibaro Keyfob FGKF-601
FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered, compact remote control.
Six buttons allow you to control other devices through the Z-Wave network and run various scenes defined in FIBARO System.
Configure actions for one, two, three clicks, holding the button and button sequences to suit all your needs.
Built-in locking system will ensure that unauthorized person will not take control of your home
SKU: FK061-1 -
DIY Products, Motion Sensors, Safety & Security
Fibaro Motion Sensor FGMS-001
FIBARO Motion Sensor is a universal Z-Wave multi-sensor.
Along with detecting motion the device measures the temperature and light intensity.
The sensor has a built-in accelerometer to detect any tampering of the device.
FIBARO Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface.
The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network.
The motion sensor can be used for lighting scenes and presence monitoring systems
SKU: FM062-1 -
Accessories, DIY Products
Fibaro Swipe FGGC-001
Fibaro Swipe is a revolutionary battery gesture control pad that
allows you to control devices in your Z-Wave network without actually
touching anything.Swipe up, down, left, right, make a circular gesture and use sequences to get full and intuitive control of your home.
Installed device perfectly matches your interior design, as it resembles a picture frame.You can even personalize it with your favourite picture.
Gesture controlled menu allow to add/remove or reset the device without dismounting it.
The device is equipped with a buzzer that confirms performed gestures and other actions.SKU: FSW057-1 -
Accessories, DIY Products
Fibaro The Button FGPB-101
FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device.
It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System.
Different actions may be triggered with one to five clicks or by holding the button down.
In panic mode, each press of the button results in triggering the FIBARO Alarm.
With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
SKU: FB060-1 -
DIY Products, RGB Mixers
Fibaro RGBW Controller FGRGBWM-441
FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.
FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads.
It can also measure active power and energy consumed by the load.
Controlled devices may be powered by 12 or 24V DC.
Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.
SKU: FRG064-1
10 Days Replacement.
There are no reviews yet.