- Insert Into Switch Board Connected With Existing Switch.
- Power supply: 100-240V AC, 50/60 Hz
- Supported load types: Resistive and incandescent
- Rated load current: 8A – continuous load
- Operating temperature: 0-35°C (32-95°F)
For installation in boxes: Ø ≥ 50mm, depth ≥ 60mm - Overcurrent protection: required external 10A circuit breaker
- Radio protocol: Bluetooth® low energy
- Radio signal power: EIRP up to 10dBm
- Radio frequency: 2.4 GHz
- Radio transmit power: up to 10 dBm (EIRP)
- EU directives compliance: RED 2014/53/EU
RoHS 2011/65/EU - Dimensions (L x W x H): 42.5 x 38 x 20.4 mm
Fibaro Apple Kit Single Switch (FGBHS-213)
Product Code: SHM7673Product Class: DYP
Sold By: Arihant Automation
- Insert Into Switch Board Connected With Existing Switch.
- FIBARO Single Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices.
- FIBARO Single Switch allows to control connected devices either via Home Kit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
- To control this Home Kit-enabled accessory, iOS 10 or later is recommended.
- Controlling this Home Kit-enabled accessory automatically and away from home requires an Apple TV with TvOS 10 or later or an iPad with iOS 10 or later set up as a home hub.
₹6,499.00
Report AbuseWeight | 0.250 kg |
---|---|
Dimensions | 60 × 60 × 5 cm |
Apple Home Kit Ready | |
Connects To | |
Human Interface | |
Installation | |
Connectivity | |
Color | |
Brand | |
Country of Origin |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
-
DIY Products, Door Window Sensors, Safety & Security
Fibaro Door Sensor 2 FGDW-002
FIBARO Door/Window Sensor 2 is a wireless,
battery powered Hall effect contact sensor,
compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc.
Opening is detected by separating the sensor’s body and the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.
SKU: FD063-1 -
Accessories, DIY Products
Fibaro Swipe FGGC-001
Fibaro Swipe is a revolutionary battery gesture control pad that
allows you to control devices in your Z-Wave network without actually
touching anything.Swipe up, down, left, right, make a circular gesture and use sequences to get full and intuitive control of your home.
Installed device perfectly matches your interior design, as it resembles a picture frame.You can even personalize it with your favourite picture.
Gesture controlled menu allow to add/remove or reset the device without dismounting it.
The device is equipped with a buzzer that confirms performed gestures and other actions.SKU: FSW057-1 -
DIY Products, Switches & Relays
Fibaro Single Switch 2 FGS-213
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
SKU: F1R066-1 -
Accessories, DIY Products
VARTA CR123A REPLACEMENT BATTERY FOR FIBARO MOTION SENSOR PACK OF 10
VARTA CR123A REPLACEMENT BATTERY FOR FIBARO MOTION SENSOR PACK OF 10
Battery Size: CR123A
Battery Capacity (mAh): 1430
Battery Chemistry: Lithium
Battery Voltage: 3
Battery Terminal Type: Button Top
Battery Shelf Life: 10 Years
Packaging: Retail Packaging
Brand: VartaSKU: n/a
10 Days Replacement.
There are no reviews yet.