No products in the cart.
-33%
DIY Products, Touch Switches
Product Class: DYP
Sold By: Power Smart Shoppe
4Gang + Fan (Touch & Amp; RF Remote) Smart Switch Module
Product Code: SHM9589Product Class: DYP
Availability:
Coming Soon
Sold By: Power Smart Shoppe
Specifications:
Basic feather touch operation
4Gang and fan with speed control
Working from 110V to 240V
Output: Resistive loads 1000 Watts
And Inductive loads 600 Watts
Blue on bright indication
Scratch proof crystal tempered glass panel
Water proof high insulation touch glass pad
Easy to install, Neutral wire required
Remote range 20 M
Remote battery 12V,23AE
Frequency 433Mhz
Remote o/p power 50mw
Suitable for 4 Module size for (4G+F,4G+Socket and 8G)and 2 Module size for (4G and Fan)
Dimension: 147 x 86 x 40mm for (4G+F,4G+Socket and 8G) & 86mm X 86mm for (4G and Fan)
₹3,525.00 ₹5,300.00
Coming Soon
Report Abuse| Weight | 0.350 kg |
|---|---|
| Dimensions | 14.7 × 8.6 × 4 cm |
| Country of Origin | |
| Color | |
| Connects To | |
| Human Interface | |
| Installation | |
| Connectivity |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
No product has been found!
10 Days Replacement.
Product Enquiry
Related products
-
Coming Soon, Switches & Relays
TIS 4 Channels Led Dimmer 0 To 10 Volt ADS-4Ch-0-10V
Used to control 0-10V LED Driver lights,
The four channel dimmer can dim 4 channels of 0-10V driver connected to different LEDs or florescent lights, or it can control the color of a single red, green, blue, white color strip.
SKU: TAD011 -
DIY Products, Motion Sensors, Safety & Security
Fibaro Smoke Sensor FGSD-002
- The Fibaro Smoke Sensor Is A Universal, Optical Z-Wave Smoke Detector.
- Fire Alarm Is Signaled By Sound, Visual Indicator Blinking And By Sending Z-Wave Alarm And Control Commands.
- The Optical Sensor Detects Smoke At An Early Stage Of Fire, Often Before Flames
- Appear And Temperature Starts To Rise Significantly.
- Moreover The Device Has A Built-In Temperature Sensor, Which Is Programmable Indicator Of Exceeding Set
- Temperature Level.
- The Fibaro Smoke Sensor Is Designed To Be Placed On A Wall Or Ceiling.
- Visual Indicator Signals Fire, Operating Mode And Is Used To See If Device Is Within The Z-Wave Network.
- The Smoke Sensor Is Designed To Operate In Confined Spaces,
- Under Normal Conditions (Lacking Smoke, Dust, Condensed Water Vapor).
SKU: FS055 -
Accessories, DIY Products, Switches & Relays
Fibaro The Button FGPB-101
FIBARO Button is a compact, battery-powered, Z-Wave Plus compatible device.
It allows you to control devices through the Z-Wave network and run various scenes defined in FIBARO System.
Different actions may be triggered with one to five clicks or by holding the button down.
In panic mode, each press of the button results in triggering the FIBARO Alarm.
With its small design and wireless communication, the FIBARO Button can be conveniently mounted on any surface and in any position or location at home, e.g. beside the bed or under the desk.
SKU: FB060 -
DIY Products, Switches & Relays
Fibaro Double Switch 2 FGS-223
Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network security mode) with AES-128 encryption,
• Advanced microprocessor control,
• Active power and energy metering functionality,
• Works with various types of switches – momentary, toggle, three-way, etc,
• To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations,
• FIBARO Switch 2 is an extension unit.
SKU: F2R068
There are no reviews yet.